Automatic Die Forming Machine for die molded rings with manual feeding from 50 mm to 300 mm
The automatic Die forming machine model APM70 forms compacted die moulded rings, of any shapes, using graphite strips or other similar materials, having a diameter between 50 and 300 mm.
This forming machine works in the following mode
- The operator feeds manually the pre-wound graphite strip into the mould
- The ring manufacturing cycle is made in automatic by the machine including the ring ejection
- The machine can work with a max of 4 moulds
The machine can work with a max of 4 moulds.
Main machine features
- Control system by PLC and Touchscreen Operator Panel to automatically control the manufacturing process and the gasket parameters
- Pressing device made up hydraulic cylinder having a stroke of 350 mm and 30 tons pressing strength
- Possibility to use the existing moulds of the customers
- Automatic setting by PLC parameter of:
- pressing stroke
- ejector stroke
- upper position of the punch
- Electromagnetic plate for punch fixing and support allowing an easy and quick change of production
- Pressing strength adjustment by operator panel’s parameter
- Easy gasket program creation
- Manufacturing Programs storage on SD card
- Remote assistance
| Description | Value | Unit |
|---|---|---|
| Operating mode | Automatic with manual loading | |
| Gasket maximum outer diameter | 300 | mm |
| Gasket minimum inner diameter | 50 | mm |
| Graphite strip maximum height | 120 | mm |
| Automatic cycle duration (Graphite strip height 30 mm, ring dia. 150 mm) | 11 | sec./piece |
| Air supply pressure | 6÷8 | bar |
| Power supply | 17,5 | KW |
| Max stroke of the punch | 350 | mm |
| Max stroke of the ejector | 125 | mm |
| Max number of mould | 4 | Nr. |
| Pressing strength | 70 ** | Tons |
| No. of pressing steps before ejecting the finished product | to be programmed | |
| PLC and Programming terminal | PANASONIC | |
| Approx. machine size | 1400 x 1150 x 2700h | mm |
| Total weight of the machine | 4.570 | Kg |
